Yes. We manufacture our oak doors and gates in Lincolnshire and deliver throughout England, Scotland and Wales. Whether you are located in a city, town or rural area, we can arrange delivery directly to your address.
See how to construct a Ledge and Brace Door with our You Tube "How to" Guide. To view please click on the link:-
As standard all of our door boards are 21mm thick as are the ledges and braces, although we do make everything on site to order so we can machine to different thicknesses if required.
There is no set procedure for this but we would advise clamping the door boards together, we do not glue in between boards as this allows movement, we set the ledges 200mm from the top and bottom of the door and the middle ledge in the middle of the door. As standard our ledges are cut 30mm shorter than the width of the door to allow closing into the frame, so leave 15mm either side of the ledge when positioning. Once in place apply glue and clamp down onto the boards and we air nail and glue the ledges onto the boards. Although this can be done with any method of fixing you prefer.
As everything is made on site to order we do have varying lead times depending on what product you require and how busy we are at point of order, please contact us and a member of our team will be able to give you more information.
We use a variety of delivery options depending on type of product ordered and quantity. However most orders are sent with a local designated courier, once the order is ready it collected from us and delivered straight to the customers house. This practically removes damages and late deliveries etc.
We use a Treatex UV Oil to coat our exterior door and frames if a coating is required, this is a 2 part system and has a light sand in between coats. We do also offer an exterior water based lacquer if you want something that has a glossy finish.
Our door linings are 21mm x 120mm as standard but we can machine at any size you require, just contact a member of our team for more information. A door lining set would consist of 2 legs at 2100mm and a head at 1000mm. Our door lining sets also include the door stops at 44mmx12mm.
We make everything onsite to order in our factory in Lincolnshire so we specialise in bespoke sizes. Contact a member of our team for more information. We do also offer a range of standard sizes.
We offer all of our carpet and flooring bars in 3 standard lengths of 864mm, 2000mm and 2400mm. Although if you need alternative sizes that is no problem just get in touch for a price.
We offer our thresholds in rebate sizes of 9mm, 14mm, 18mm and 22mm.
Yes if the door and frame is purchased from ourselves we can pre-hang it for you for an extra cost of £200.00 plus VAT.
As standard we use character grade oak unless specified although we do offer a prime grade if required.
At Wittswood, our oak ledge and brace doors can be made using two distinct construction methods:
1. Air Nailed and Glued
This method involves using a high-pressure air nailer combined with strong wood adhesive. It offers a clean finish with minimal visible fixings. This technique is ideal for internal doors where a smoother appearance is preferred and where the door will not be subject to excessive force or movement.
Best for:
– Internal doors
– Modern or minimal finishes
– Faster installation
2. Screwed and Pelleted
With this method, the boards are screwed together for extra strength, and the screw heads are concealed using matching oak pellets. This provides a more traditional look and adds durability, especially for doors in areas prone to heavier use. Using the screw and pelleted method also allows the boards to move independently of the door structure to allow for expansion due to increased humidity or temperature changes.
Best for:
– Higher-traffic areas
– Traditional or rustic aesthetics
– Situations requiring added strength
Both methods offer solid construction, and the choice largely depends on where the door will be used and your preferred finish.
All of our doors are made to order and carefully prepared for transport. Once your order is complete, we will contact you to arrange delivery and provide any relevant information regarding access and unloading requirements.
No. Most of our customers order remotely. We can discuss your requirements by phone or email, provide a quotation and manufacture your door to your supplied dimensions before arranging delivery.
Yes. We regularly supply oak doors and gates to customers throughout the UK. Our location in Lincolnshire does not limit where we can deliver.
No. We specialise in manufacturing bespoke oak doors and gates. We do not offer an installation service, but your chosen builder, joiner or contractor will normally be able to fit the product for you.