Treatex UV Oil is the next generation clear UV protective finish offering excellent protection against the bleaching effect of the suns Ultra Violet rays. It penetrates deeply into timber surfaces and, in a similar way to bark, attaches to the wood capillaries providing protection against extreme climate conditions.
Manufactured on a base of refined natural oils such as soybean and sunflower oil and waxes, Treatex UV Oil is designed for use on most vertical timbers and applications (excluding horizontal surfaces such as decking and walkways where water gathers) and can be used over Treatex Exterior Oils and Classic Colour Collection. Treatex UV Oil is the ideal finish for cladding, doors, windows and other exterior joinery.
Suitable for external use.
Recommended timbers: suitable for use on most timbers but check if unsure. Timbers with a high tannin content such as air dried Oak may still leach tannin in the early stages.
Applications: Cladding, doors, windows, shingles and other exterior joinery - not for decking or other predominantly horizontal surfaces.
Coverage: Approximately 50m2 in one coat depending on the timber and method of application. Old/dry/porous/rough sawn timbers will consume more product.
PREPARATION: Treatex UV Oil works best on unfinished timbers. Previous finishes which stop UV Oil penetrating into the timbers (e.g. paints and other 'closed' finishes) must be fully removed prior to application. Previous porous finishes should be lightly sanded to 120 grit before over coating. When over coating a previously finished surface, a trial application is essential. Flaking or peeling finishes must be fully removed prior to application. Ensure the timber is dry and free from possible contaminates e.g. algae, grease, dirt, dust etc.
We advise that when using Treatex UV Oil, sufficient product is purchased to complete the whole project and when more than one tin is required it is advisable to mix them together before use. The timber must have a moisture content below 18% and the timber must have a moisture content around 18% or lower and the ambient temperature must be between 8% and 25% during application and drying. Ensure that no rain is forecast before, during or after application or that timber is treated in a dry environment. We strongly recommend a trial application prior to starting the project.
APPLICATION: Stir tins thoroughly, before and during use. Use a brush or roller to evenly apply Treatex UV Oil in the same direction as the wood grain. Pay particular attention to the end grain, where you should apply liberally. If possible, coat all sides of the timber at least once. After approximately 12 hours the first coat can be overcoated. Apply with a brush or roller a second coat of Treatex UV Oil, and leave for approximately 12-24 hours to fully dry. A third coat can be applied for further longevity but is not necessary.
If you would like anymore information please call the office on 01205 722700 and a member of our team will be happy to help.