Treatex Hardwax Oil Ultra Clear Matt is the next generation Hardwax Oil, designed to enhance and protect the natural beauty of all your interior surfaces. Hardwax Oil Ultra is user friendly, easy to apply, and quick drying, with an ease of application and durabile finish.
The end result is a hard wearing, attractive finish in any situation including, floors, doors and kitchen worktops that is easy to maintain with Treatex maintenance products (which we can also supply) and is spot repairable if the surface is damaged.
Treatex Hardwax Oil Ultra is also based on the Treatex formulation of sustainable raw materials such as Beeswax, Carnauba wax, Candilla wax, Linseed oil, Sunflower oil, Jojoba oil. It contains no biocides or preservatives and is certified food safe.
Suitable for: Internal Use.
Recommended timbers: All species of timber (dense or oily timbers may require Treatex Thinner). Has a warming effect on some lighter timbers.
Applications: Floors, doors, stairs, worktops, skirting, furniture, table tops, wood turning, wood toys, instruments.
Coverage: Approximately 20m2 in one coat/12m2 in two coats. Some timbers may absorb more oil e.g. pine/other soft woods.
Preparation: Treatex Hardwax Oil Ultra works best on untreated timber but can be applied over a previous coating of hardwax oil if it is clean and suitable for treating. If in doubt of the type of finish, it is better to fully remove. Sand the timber to 120 grit to provide best absorption. DO NOT wash the surface with white spirit etc. or water after sanding. All sawdust should be removed with a hoover or tac cloth. Ensure that enough product has been purchased to complete the work as required. If applying to a floor with underfloor heating, make sure that the heating has been off long enough for the floor to cool (at least 24 hrs) and don't switch on until the Hardwax Oil has dried sufficiently.
Application: Stir tin(s) thoroughly before applying. Evenly apply the first coat with a good quality brush (Treatex brushes are available) or a short pile micro fibre roller. Leave to dry for 3-6 hours, allowing sufficient ventilation to the room will ensure a reliable drying time. Once dry, apply a second coat and leave to dry. The surface should be fine for careful use after 8 hours. Furniture can be placed on floors after approximately 18 hours. Breathable covers e.g. cardboard, rugs etc should not be placed down for 72 hours, non breathable vapour proof coverings such as plastic sheeting should not be placed over the surface for at least 14 days.